[ Pobierz całość w formacie PDF ]
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL
BMW X5 01 ! DIESEL
!
MAKE MOD. YEAR
X
ALARM/SIREN Position the compact alarms and the sirens on the passenger s side wheelhouse.
POSITION
Install the modular systems and the modules behind the glove compartment under the
CENTRAL POSITION
dashboard, passenger s side.
POWER SUPPLY + 30: connect to the 6 mm2 RED wire located in the wiring harness along the steering
column.
- 31: connect to a ground terminal located behind the left lateral bulkhead, driver s
side.
IGNITION WIRE +15/54: connect to the wire with the function of ignition wire located in the wiring
harness coming out of the connector of the ignition key.
DIRECTION INDICATORS Connect to the wires: BLUE/GREEN at the position nr.11 (ant.left), BLUE/BROWN at
the position nr.12 (post.right), BLUE/YELLOW at the position nr.14 (lat.left) located in
the wiring harness of the 15 way white connector; BLUE/GREEN at the position nr.8
(post.left), BLUE/BROWN at the position nr.6 (ant. right), BLUE/YELLOW at the
position nr.14 (lat. right) located in the wiring harness coming out of the 15 way black
connector located on the coming out of the lights module, on the right of the
passenger s side glove compartment, behind the covering.
Refer to the diagram nr.147.
ELECTRIC WINDOWS Comfort closing
Negative control signal
The total closing of the windows is obtained timing at 24s. the LIGHT BLUE/RED wire,
position nr.4, the same wire used for the doors locking.
CENTRAL DOORS LOCKING Negative control signal
Connect to the LIGHT BLUE/RED wire at the position nr. 4 (lock) and to the
WHITE/BLACK wire at the position nr. 3 (unlock) located in the wiring harness coming
out of the 12 way black connector directly in the buttons panel inside the driver s side
door.
IMMOBILISATION POINT Information not available.
STARTER +50: cut the 3 mm2 BLACK/YELLOW wire located in the wiring harness coming out of
the ignition key.
BONNET SWITCH Install an additional switch on the front headlamp support plate, passenger s side.
DOORS AND BOOT Connect to the RED/BLUE wire, at the position nr. 20, located in the wiring harness
coming out of the 20 way black connector on the coming out of the central locking unit
SWITCHES
placed behind the glove compartment, passenger s side. Invert the signal with a
supplementary relay.
Attention: as the polarity of the doors is at a positive control signal, it is necessary to
invert the signal by using a relay.
bmx501gbd.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N147
Diagram for direction indicators connection for BMW X5
YELLOW YELLOW
15 way
white connector
BLUE/GREEN Pos. nr.11
BLUE/BROWN Pos. nr.12
BLUE/YELLOW Pos. nr.14
BLUE/GREEN Pos. nr. 8
BLUE/BROWN Pos. nr. 6
BLUE/YELLOW Pos. nr.14
15 way
black connector
bmx501gbd.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
[ Pobierz całość w formacie PDF ]